Tripp Lite B119-003 Bedienungsanleitung PDF herunterladen

Owner’s Manual

HDMI 3-to-1 Switch with Remote

Model: B119-003

Tripp Lite World Headquarters

1111 W. 35th Street, Chicago, IL 60609 USA

Customer Support: (773) 869-1234 • www.tripplite.com

Note: Follow these instructions and operating procedures to ensure correct performance and to prevent damage to this unit or to its connected devices.

WARRANTY

REGISTRATION

a chance to win a FREE Tripp Lite

product! www.tripplite.com/warranty

Package Contents

• B119-003 HDMI 3-to-1 Switch • Remote Control

• Infrared Receiver • AC Adapter (100-240V), 5V 1A Output

• Owner's Manual

Overview and Product Features

The B119-003 HDMI 3-to-1 Switch with Remote enables you to select one of three HDMI sources to

be displayed on a single HDMI monitor. Key product features are:

• 5V 1A power consumption • Signal rates up to 1.65 Gbps

• UXGA display support • Pixel rates up to 165 MHz

Installation and Operation

Figure 1: Location of Input/Output Connections

1. Connect user-supplied HDMI cables between the HDMI sources and the B119-003 switch inputs

marked INPUT A, INPUT B and INPUT C. (Figure 2)

Figure 2: Connection of HDMI Sources

2. Connect the HDMI cable between the HDMI display and B119-003 switch marked OUTPUT.

Note: Make sure the HDMI Source is plugged into the INPUT port and the HDMI display is

plugged into either OUTPUT port. (Figure 3)

Figure 3: Connection of HDMI Display

3. Connect the cord from the DC adapter to the DC 5V jack and plug it into a wall outlet. The front

POWER LED will illuminate. (Figure 4)

Figure 4: Connection of DC Adapter

4. Turn on the power to your HDMI display before powering your HDMI sources.

Figure 5: Selecting an HDMI Source

5. Connect the Remote Host IR Receiver to the REMOTE INPUT on the back of the switch. You can

use either the included hand-held remote control or the front SELECT button to toggle between

HDMI sources. (Figure 5)

Troubleshooting

If you experience problems with your B119-003 switch, try the following remedies:

• Connect an HDMI cable directly between the source and the display to verify that the cable is

operating. Repeat to test all cables.

• Once you confirm that all HDMI cables are functional, use two cables to test the ports on the

B119-003 switch. Plug one cable between the display and the OUTPUT port on the switch. Plug

the second cable between INPUT A and the source. Repeat with INPUT B and INPUT C, using the

same source. If all ports function, the B119-003 is operating properly. Note: To ensure that both

sources and display function properly, the combined cable length should not exceed 5 meters.

• If the unit is plugged in and the Power LED is not lit, verify that the power supply is functioning.

Use a voltmeter to measure the output of the DC adapter to verify that 5V is present. If output is

5V, the DC adapter is functional and the B119-003 switch has failed. Note: The positive (+) is in

the middle of the plug and the ground (-) is on the exterior of the plug.

Figure 1.

Figure 2.

Figure 3.

Figure 4.

Figure 5.

Warranty & Warranty Registration on Page 4

1 2

Inhaltsverzeichnis

Seite 1 - Owner’s Manual

Owner’s ManualHDMI 3-to-1 Switch with RemoteModel: B119-003Tripp Lite World Headquarters1111 W. 35th Street, Chicago, IL 60609 USACustomer Support: (7

Seite 2 - Garantie

4Warranty & Warranty Registration1-Year Limited WarrantyTRIPP LITE warrants its products to be free from defects in materials and workmanship for